 
Advantages
- Reduced total installed cost-fast economical installation
- Superior insulation and thermal performance.
- Easily shaped to fit oval inlets and fittings.
- All components are self-extinguishing and will not support flame.
- Underwriters Laboratories UL181listed and complies with NFPA Standards 90A and 90B.
- Complies with most state and federal standards or codes.
- Unique construction will not unravel when cut.
- Suitable for air venting and drying applications
S-LD Specs
| Diameter: |
3-14 inches ID |
| Pressure Rating: |
(WG) |
| Positive: |
10 inches (3"-14" ID) |
| Negative: |
1 inch (3"-14" ID) |
| Velocity: |
5000 FPM |
| Temp. Range: |
-20° F - 250° F cont. |
|
|
|
Thermaflex flexible duct has been awarded GREENGUARD Certification by the GREENGUARD Environmental Institute (GEI). To earn certification Thermaflex products went through a series of rigorous emissions test to confirm the level of volatile organic chemicals (VOC) emitted. These tests proved positive in enabling Thermaflex to gain certification by the GREENGUARD Certification Program, the only independent program for low emitting-products.
