 
Flexible Air Connector
Non-insulated air connector with extremely strong woven fiberglass fabric with flame retardant coating, permanently bonded to a corrosion resistant coated spring steel wire helix. For all pressure heating and cooling systems. A superior alternative in applications where insulated duct is not required, or cannot be used.
S-LP-10 Specs
| Diameter: |
2-14 inches ID |
| Pressure Rating: |
(WG) |
| Positive: |
10 inches (2"-14" ID) |
| Negative: |
1 inch (2"-14" ID) |
| Velocity: |
5000 FPM |
| Temp. Range: |
-20° F - 250° F cont. |
|
|
|
Thermaflex flexible duct has been awarded GREENGUARD Certification by the GREENGUARD Environmental Institute (GEI). To earn certification Thermaflex products went through a series of rigorous emissions test to confirm the level of volatile organic chemicals (VOC) emitted. These tests proved positive in enabling Thermaflex to gain certification by the GREENGUARD Certification Program, the only independent program for low emitting-products.
